Well-designed Water Pressure Booster Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:

Product Detail

Product Tags

Feedback (2)

We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Single Stage Centrifugal Pump , Priming Of Centrifugal Pump , Constant Pressure Booster Pump , We believe you will be satisfied with our reasonable price, high quality products and fast delivery. We sincerely hope you can give us an opportunity to serve you and be your best partner!

Well-designed Water Pressure Booster Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL	Power (W)	Voltage (V/HZ)	Max.flow （L/min)	Max.head (m)	Rated flow (L/min)	Rated head (m)	Suction head (m)	Pipe size (mm)
JET132-600	600	220/50	67	40	42	30	9.8	25
JET135-800	800	220/50	75	45	50	30	9.8	25
JET135-1100	1100	220/50	75	50	58	35	9.8	25
JET159-1500	1500	220/50	117	55	67	40	9.8	40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.

Product detail pictures:

Related Product Guide:

To be the stage of realizing dreams of our employees! To build a happier, far more united and far more specialist team! To reach a mutual profit of our customers, suppliers, the society and ourselves for Well-designed Water Pressure Booster Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Puerto Rico, Madras, Armenia, Our Company has qualified engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the items, Be sure to feel free to contact us.

Best Centrifugal Water Pump