Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The business keeps to the operation concept "scientific management, premium quality and efficiency primacy, customer supreme for Self Priming Electric Water Pump , Surface Centrifugal Pump , Well Water Booster Pump , Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL Power
(W)
Voltage
(V/HZ)
Max.flow
(L/min)
Max.head
(m)
Rated flow
(L/min)
Rated head
(m)
Suction head
(m)
Pipe size
(mm)
JET132-600 600 220/50 67 40 42 30 9.8 25
JET135-800 800 220/50 75 45 50 30 9.8 25
JET135-1100 1100 220/50 75 50 58 35 9.8 25
JET159-1500 1500 220/50 117 55 67 40 9.8 40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.


Product detail pictures:

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures


Related Product Guide:

owing to excellent assistance, a variety of high quality products and solutions, aggressive costs and efficient delivery, we take pleasure in an excellent popularity amongst our customers. We are an energetic business with wide market for Short Lead Time for Mains Water Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: The Swiss, New York, Israel, We have a professional sales team, they have mastered the best technology and manufacturing processes, have years of experience in foreign trade sales, with customers able to communicate seamlessly and accurately understand the real needs of customers, providing customers with personalized service and unique products.
  • This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
    5 Stars By Debby from Roman - 2017.01.28 19:59
    The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Iris from Germany - 2018.12.11 11:26
    Write your message here and send it to us