Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for Ro Booster Pump , Booster Motor Pump , Surface Centrifugal Pump , We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy with you. We also warmly welcome customers to visit our factory and purchase our products.
Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL Power
(W)
Voltage
(V/HZ)
Max.flow
(L/min)
Max.head
(m)
Rated flow
(L/min)
Rated head
(m)
Suction head
(m)
Pipe size
(mm)
JET132-600 600 220/50 67 40 42 30 9.8 25
JET135-800 800 220/50 75 45 50 30 9.8 25
JET135-1100 1100 220/50 75 50 58 35 9.8 25
JET159-1500 1500 220/50 117 55 67 40 9.8 40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.


Product detail pictures:

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING detail pictures


Related Product Guide:

We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Original Factory Small Water Pressure Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: belarus, Casablanca, Costa rica, We expect to provide products and services to more users in global aftermarket markets; we launched our global branding strategy by providing our excellent products all over the world by virtue of our well reputed partners letting global users keep pace with technology innovation and achievements with us.
  • The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Victoria from Pretoria - 2017.07.07 13:00
    This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Karen from Bhutan - 2018.08.12 12:27
    Write your message here and send it to us