Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Ac Pump , Ro Booster Water Pump , Inline Electric Water Pump , We warmly welcome clients from all around the world for almost any sort of cooperation with us to build a mutual advantage potential. We've been devoting ourselves wholeheartedly to supply consumers the very best company.
Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL Power
(W)
Voltage
(V/HZ)
Max.flow
(L/min)
Max.head
(m)
Rated flow
(L/min)
Rated head
(m)
Suction head
(m)
Pipe size
(mm)
JET132-600 600 220/50 67 40 42 30 9.8 25
JET135-800 800 220/50 75 45 50 30 9.8 25
JET135-1100 1100 220/50 75 50 58 35 9.8 25
JET159-1500 1500 220/50 117 55 67 40 9.8 40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.


Product detail pictures:

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures


Related Product Guide:

Our intention should be to fulfill our consumers by offering golden provider, superior price and superior quality for Manufacturer of Non-Automatic Jet Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Poland, El Salvador, Germany, All the imported machines effectively control and guarantee the machining precision for the products. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality products and have the ability to develop new products to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
  • Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
    5 Stars By Eleanore from South Korea - 2018.12.11 11:26
    Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By Hilary from Berlin - 2017.01.11 17:15
    Write your message here and send it to us