Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Well Booster Pump , Water Line Booster Pump , Portable Electric Water Pump , We warmly welcome you to establish cooperation and create a bright future together with us.
Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL Power
(W)
Voltage
(V/HZ)
Max.flow
(L/min)
Max.head
(m)
Rated flow
(L/min)
Rated head
(m)
Suction head
(m)
Pipe size
(mm)
JET132-600 600 220/50 67 40 42 30 9.8 25
JET135-800 800 220/50 75 45 50 30 9.8 25
JET135-1100 1100 220/50 75 50 58 35 9.8 25
JET159-1500 1500 220/50 117 55 67 40 9.8 40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.


Product detail pictures:

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING detail pictures


Related Product Guide:

It is a good way to enhance our products and solutions and repair. Our mission will be to build creative solutions to consumers with a great experience for Manufacturer for Jet Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Portugal, Belgium, Slovakia, Due to the stability of our products, timely supply and our sincere service, we are able to sell our products not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By David from Mali - 2017.06.16 18:23
    This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Odelia from Guatemala - 2018.09.29 13:24
    Write your message here and send it to us