Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of Low Pressure Booster Pump , Wzb Pump , High Pressure Water Pump , The principle of our organization is usually to provide high-quality items, qualified services, and trustworthy communication. Welcome all friends to place trial order for developing a long-term small business relationship.
Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL Power
(W)
Voltage
(V/HZ)
Max.flow
(L/min)
Max.head
(m)
Rated flow
(L/min)
Rated head
(m)
Suction head
(m)
Pipe size
(mm)
JET132-600 600 220/50 67 40 42 30 9.8 25
JET135-800 800 220/50 75 45 50 30 9.8 25
JET135-1100 1100 220/50 75 50 58 35 9.8 25
JET159-1500 1500 220/50 117 55 67 40 9.8 40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.


Product detail pictures:

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING detail pictures


Related Product Guide:

We're commitment to offer you the competitive price ,remarkable products excellent, also as fast delivery for Low MOQ for Mini Booster Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Chile, Haiti, Hyderabad, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.
  • We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
    5 Stars By May from Finland - 2018.06.18 19:26
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Monica from Singapore - 2017.11.20 15:58
    Write your message here and send it to us