Good quality Electric Water Pumps - High Head Self-Priming JET Pump – GOOKING

Short Description:

Product Detail

Product Tags

Feedback (2)

The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for Constant Pressure Booster Pump , Self Priming Clean Water Pump , High Pressure Water Pump , The principle of our company is to provide high-quality products, professional service, and honest communication. Welcome all friends to place trial order for creating a long-term business relationship.

Good quality Electric Water Pumps - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL	Power (W)	Voltage (V/HZ)	Max.flow （L/min)	Max.head (m)	Rated flow (L/min)	Rated head (m)	Suction head (m)	Pipe size (mm)
JET132-600	600	220/50	67	40	42	30	9.8	25
JET135-800	800	220/50	75	45	50	30	9.8	25
JET135-1100	1100	220/50	75	50	58	35	9.8	25
JET159-1500	1500	220/50	117	55	67	40	9.8	40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.

Product detail pictures:

Related Product Guide:

Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for Good quality Electric Water Pumps - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Sydney, Lisbon, Tajikistan, We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.

Centrifugal Pump Selection