Factory Outlets Self Priming Monoblock Pump - High Head Self-Priming JET Pump – GOOKING
Factory Outlets Self Priming Monoblock Pump - High Head Self-Priming JET Pump – GOOKING Detail:
MODEL | Power (W) |
Voltage (V/HZ) |
Max.flow (L/min) |
Max.head (m) |
Rated flow (L/min) |
Rated head (m) |
Suction head (m) |
Pipe size (mm) |
JET132-600 | 600 | 220/50 | 67 | 40 | 42 | 30 | 9.8 | 25 |
JET135-800 | 800 | 220/50 | 75 | 45 | 50 | 30 | 9.8 | 25 |
JET135-1100 | 1100 | 220/50 | 75 | 50 | 58 | 35 | 9.8 | 25 |
JET159-1500 | 1500 | 220/50 | 117 | 55 | 67 | 40 | 9.8 | 40 |
JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.
JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。
Features:
1.High suction head
2.High efficiency
3.High quality
4.High-end technique
Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.
Product detail pictures:
Related Product Guide:
Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Factory Outlets Self Priming Monoblock Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Hamburg, Thailand, Australia, Certainly, competitive price, suitable package and timely delivery will be assured as per customers' demands. We sincerely hope to build business relationship with you on the basis of mutual benefit and profit in the very near future. Warmly welcome to contact us and become our direct cooperators.
By Hilary from Slovakia - 2017.10.27 12:12
It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
By Nicola from Cannes - 2017.06.19 13:51