Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Self-Priming Water Pump , Quiet Water Pressure Booster Pump , Mains Booster Pump , Only for accomplish the good-quality product or service to satisfy customer's demand, all of our products have been strictly inspected before shipment.
Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING Detail:

MODEL Power
(W)
Voltage
(V/HZ)
Max.flow
(L/min)
Max.head
(m)
Rated flow
(L/min)
Rated head
(m)
Suction head
(m)
Pipe size
(mm)
JET132-600 600 220/50 67 40 42 30 9.8 25
JET135-800 800 220/50 75 45 50 30 9.8 25
JET135-1100 1100 220/50 75 50 58 35 9.8 25
JET159-1500 1500 220/50 117 55 67 40 9.8 40

JET series adopts high-tech anti-rust treatment to ensure that the pump space will never rust, targeted to solve the problems of rust in the water pump. JET pump can be widely used in pumping river water, well water, boiler, textile industry and household water supply, gardens,canteens, bathhouses, hair salons and high buildings.

JET pump use efficient bearings, 100% copper winding motor. In order to protect the motor, there’s built-in thermal protector. The insulation class is B, while IP grade could reach to IP44. JET series pump could pump hot water to 70℃。

Features:

1.High suction head
2.High efficiency
3.High quality
4.High-end technique

JET-3

JET-4

Installation:
1.Connect the water inlet and bottom valve with 25mm water pipe. The connection seal shall not leak air.
2.During installation,the water pump shall be close to the water source, and the length of the suction pipe and the number of elbows shall be reduced. The installation height of suction shall be less than the suction head.
3. Before starting the pump, unscrew the plug of the filling bolt, fill the pump with water, and then tighten the bolt to ensure the seal.If no water can be pumped after 2-3 minutes of operation, refill the water to avoid damage to the mechanical sealing device.
4. When the pump is idle for a long time, it should be checked whether the pump rotation is flexible. If it is found to be stuck or too tight, the pump shell should be dismantled and the rust and debris in the pump should be cleaned so that it can be used after flexible rotation.
5 pump in the process of operation, the flow of sudden reduction or abnormal sound or sudden stop, should immediately stop check.
6. The function of the bottom valve is to close the water backflow of the inlet pipe and prevent the inhalation of dirt, so when installing the bottom valve and the bottom of the water source should be a distance (more than 30 cm).
7. The shell of the electric pump should be reliably grounded, and should be kept dry when used. Rain gear should be used to cover the open air work to prevent dampness.


Product detail pictures:

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures

Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING detail pictures


Related Product Guide:

Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for Factory making Best Electric Water Pump - High Head Self-Priming JET Pump – GOOKING , The product will supply to all over the world, such as: Zambia, Mexico, Macedonia, We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information and we will offer you competitive price list then.
  • The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Muriel from Bangladesh - 2018.06.18 19:26
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Ada from Philippines - 2017.09.09 10:18
    Write your message here and send it to us